Skip to product information
1 of 4

Banks Power 07.5-12 Ram Cab Chassis 6.7L Diesel Monster-Ram Intake System w/Fuel Line - Red

Banks Power 07.5-12 Ram Cab Chassis 6.7L Diesel Monster-Ram Intake System w/Fuel Line - Red

SKU:GBE42806-R

Banks Monster-Ram improves throttle response and fuel economy by eliminating airflow restrictions. Prevents severe engine damage by replacing the killer grid heater with the Banks high-flow billet intake plate. The factory heater can't fail if it's not there. Monster-Ram is the only 50-state emissions-compliant RAM intake elbow. The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater and Billet Intake Plate compared to stock's 38.6 lbs/min MAF. Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications. Banks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path. Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction. With four 1/8” NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition. Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.

This Part Fits:

Year Make Model Submodel
2007-2010 Dodge Ram 2500 Laramie
2007-2010 Dodge Ram 2500 SLT
2007-2010 Dodge Ram 2500 ST
2008-2010 Dodge Ram 2500 SXT
2010 Dodge Ram 2500 TRX
2007-2010 Dodge Ram 3500 Laramie
2007-2010 Dodge Ram 3500 SLT
2007 Dodge Ram 3500 Sport
2007-2010 Dodge Ram 3500 ST
2008-2009 Dodge Ram 3500 SXT
2011-2012 Ram 2500 Laramie
2011-2012 Ram 2500 Laramie Longhorn
2012 Ram 2500 Outdoorsman
2011-2012 Ram 2500 SLT
2011-2012 Ram 2500 ST
2011-2012 Ram 3500 Laramie
2011-2012 Ram 3500 Laramie Longhorn
2011-2012 Ram 3500 SLT
2011-2012 Ram 3500 ST

BRAND

Banks Power

AVAILABILITY

Product out of stock

Regular price $898.00
Regular price $997.78 Sale price $898.00
10%
Sold out
Shipping calculated at checkout.

Tags:

  • 2007-dodge-ram-2500-laramie-esi3899181
  • 2007-dodge-ram-2500-slt-esi5520849
  • More

Out of stock

View full details
Banks Monster-Ram improves throttle response and fuel economy by eliminating airflow restrictions. Prevents severe engine damage by replacing the killer grid heater with the Banks high-flow billet intake plate. The factory heater can't fail if it's not there. Monster-Ram is the only 50-state emissions-compliant RAM intake elbow. The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater and Billet Intake Plate compared to stock's 38.6 lbs/min MAF. Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications. Banks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path. Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction. With four 1/8” NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition. Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.

This Part Fits:

Year Make Model Submodel
2007-2010 Dodge Ram 2500 Laramie
2007-2010 Dodge Ram 2500 SLT
2007-2010 Dodge Ram 2500 ST
2008-2010 Dodge Ram 2500 SXT
2010 Dodge Ram 2500 TRX
2007-2010 Dodge Ram 3500 Laramie
2007-2010 Dodge Ram 3500 SLT
2007 Dodge Ram 3500 Sport
2007-2010 Dodge Ram 3500 ST
2008-2009 Dodge Ram 3500 SXT
2011-2012 Ram 2500 Laramie
2011-2012 Ram 2500 Laramie Longhorn
2012 Ram 2500 Outdoorsman
2011-2012 Ram 2500 SLT
2011-2012 Ram 2500 ST
2011-2012 Ram 3500 Laramie
2011-2012 Ram 3500 Laramie Longhorn
2011-2012 Ram 3500 SLT
2011-2012 Ram 3500 ST
  • 2007-dodge-ram-2500-laramie-esi3899181
  • 2007-dodge-ram-2500-slt-esi5520849
  • 2007-dodge-ram-2500-st-esi8294169
  • 2007-dodge-ram-3500-laramie-esi6103317
  • 2007-dodge-ram-3500-slt-esi2327554
  • 2007-dodge-ram-3500-sport-esi9065092
  • 2007-dodge-ram-3500-st-esi4802740
  • 2008-dodge-ram-2500-laramie-esi6459188
  • 2008-dodge-ram-2500-slt-esi5989299
  • 2008-dodge-ram-2500-st-esi5246797
  • 2008-dodge-ram-2500-sxt-esi2255281
  • 2008-dodge-ram-3500-laramie-esi2254158
  • 2008-dodge-ram-3500-slt-esi3951300
  • 2008-dodge-ram-3500-st-esi5470577
  • 2008-dodge-ram-3500-sxt-esi2296804
  • 2009-dodge-ram-2500-laramie-esi5993049
  • 2009-dodge-ram-2500-slt-esi8917953
  • 2009-dodge-ram-2500-st-esi4493475
  • 2009-dodge-ram-2500-sxt-esi4739034
  • 2009-dodge-ram-3500-laramie-esi1259924
  • 2009-dodge-ram-3500-slt-esi8907258
  • 2009-dodge-ram-3500-st-esi3642919
  • 2009-dodge-ram-3500-sxt-esi5667173
  • 2010-dodge-ram-2500-laramie-esi1340534
  • 2010-dodge-ram-2500-slt-esi8412838
  • 2010-dodge-ram-2500-st-esi6880016
  • 2010-dodge-ram-2500-sxt-esi5480515
  • 2010-dodge-ram-2500-trx-esi9830871
  • 2010-dodge-ram-3500-laramie-esi8917502
  • 2010-dodge-ram-3500-slt-esi8138625
  • 2010-dodge-ram-3500-st-esi1940586
  • 2011-ram-2500-laramie-esi4445112
  • 2011-ram-2500-laramie-longhorn-esi9766276
  • 2011-ram-2500-slt-esi7216743
  • 2011-ram-2500-st-esi6422654
  • 2011-ram-3500-laramie-esi5966516
  • 2011-ram-3500-laramie-longhorn-esi8837254
  • 2011-ram-3500-slt-esi2919949
  • 2011-ram-3500-st-esi5262499
  • 2012-ram-2500-laramie-esi2004819
  • 2012-ram-2500-laramie-longhorn-esi1343457
  • 2012-ram-2500-outdoorsman-esi9163769
  • 2012-ram-2500-slt-esi3668747
  • 2012-ram-2500-st-esi4290678
  • 2012-ram-3500-laramie-esi5046602
  • 2012-ram-3500-laramie-longhorn-esi1434681
  • 2012-ram-3500-slt-esi9415558
  • 2012-ram-3500-st-esi6867426
  • Air Intake Systems>Short Ram Air Intakes
  • Bucket:Dodge
  • ClearanceItem:N
  • EPA:N/A
  • fits_2007-2010`Dodge`Ram 2500`Laramie~2007-2010`Dodge`Ram 2500`SLT~2007-2010`Dodge`Ram 2500`ST~2008-2010`Dodge`Ram 2500`SXT~2010`Dodge`Ram 2500`TRX~2007-2010`Dodge`Ram 3500`Laramie~2007-2010`Dodge`Ram 3500`SLT~2007`Dodge`Ram 3500`Sport
  • fits_2007-2010`Dodge`Ram 3500`ST~2008-2009`Dodge`Ram 3500`SXT~2011-2012`Ram`2500`Laramie~2011-2012`Ram`2500`Laramie Longhorn~2012`Ram`2500`Outdoorsman~2011-2012`Ram`2500`SLT~2011-2012`Ram`2500`ST~2011-2012`Ram`3500`Laramie
  • fits_2011-2012`Ram`3500`Laramie Longhorn~2011-2012`Ram`3500`SLT~2011-2012`Ram`3500`ST
  • LTL:N
  • MPN:42806-R
  • Non-CARB:Y
  • Prop65:N
  • SpecialOrder:N